How to Use Why it Works FAQ Feedback Contact Buy on Amazon →
Shake-to-Clean · Bottles & Tumblers

Never scrub your
bottle again —
just shake & rinse

Breaks down odor and stubborn buildup in under a minute. No brushes, no soaking, no residue left behind.

Made in Montana, USA 40 cleans per bottle No scrubbing needed Exclusively on Amazon
Before
After
Before After
Plastic Stainless Steel Glass Shaker Bottles
40×
Cleans per bottle
$0.35
Cost per clean
<1min
Start to finish
0scrubbing
Brushes needed

4 simple steps

Fresh bottle in under a minute

No brushes. No soaking. No complicated steps. Just shake and rinse.

Add powder 01

Add powder

Add 1 teaspoon of Bottle Refreshr. Works across all bottle sizes — no need to measure exactly.

1 tsp = complete clean
Add hot water 02

Add hot water

Add 1–2 oz of warm to hot water. Don't overfill — the cleaner activates with minimal water.

Hot water = better results
Shake 03

Shake vigorously

Secure the lid and shake for 30–60 seconds. Up-down and side-to-side to reach every surface.

30–60 seconds does it
Rinse 04

Rinse thoroughly

Rinse with clean warm water until fully clear. Warm water flushes away loosened residue faster.

Warm rinse = best results

Clean ingredients

What's inside matters

Thoughtfully chosen, scientifically backed — each ingredient has a job.

Sodium Bicarbonate

Gentle alkaline compound that provides light scrubbing action while neutralizing acidic odors.

Gentle scrub + deodorizing
Sodium Citrate

Naturally-derived chelating agent that binds minerals in hard water, preventing film buildup.

Chelation + film prevention
Sodium Percarbonate

Oxygen-based cleaner that activates in warm water to lift stubborn stains and odor-causing residue.

Oxygen lift for stains + odor
Sodium Cocoyl Isethionate

Mild, plant-based surfactant from coconut oil. Gentle cleaning with minimal foam for easy rinse-off.

Low-foam plant surfactant
Calcium Carbonate

Naturally derived mineral that lifts buildup and restores a polished finish without scratching.

Gentle non-scratch abrasive
Sodium Carbonate

Alkaline mineral that boosts cleaning power by breaking down stubborn residue and organic film.

Alkalinity booster
Tetrasodium EDTA

Helps the formula perform consistently in hard water by binding minerals that interfere with cleaning.

Hard-water chelation
Flow Agent

Food-grade anti-caking agent that keeps the powder free-flowing and scoopable, even in humidity.

Anti-caking + flow

The science of clean

Why Bottle Refreshr works

Engineered for tough residue, gentle enough for everyday use.

The problem

Reusable bottles trap odor, film, and residue — especially after protein shakes, coffee, and flavored drinks. Regular washing leaves buildup behind.

Protein film Coffee stain Electrolytes Greens powder Hard water film

Buildup leads to bad smells, discoloration, and an unpleasant aftertaste that regular soap can't fully remove.

The solution

Bottle Refreshr is a shake-to-clean powder that breaks down residue where brushing falls short — using chemistry instead of elbow grease.

1 Add powder + warm water
2 Shake 30–60 seconds
3 Rinse clean
Works with
Stainless steel Plastic Glass Silicone Shaker bottles

What to expect

Fast, simple routine Add, shake, rinse — done in under a minute.
Breaks down odor & residue Loosens buildup from protein, coffee, and drinks.
Bottle-safe clean Gentle enough for daily use on all materials.
Designed for regular use Simple enough for daily cleaning, strong enough for buildup.
Made in Montana, USA Formulated and manufactured in the USA with premium ingredients.
≈ $0.35 per clean 40 cleans per 10 oz bottle. Less than a pack of gum.

Available on Amazon

Ready to try it?

Bottle Refreshr is available exclusively on Amazon, fulfilled and shipped by Amazon.

Buy on Amazon Free shipping on qualifying orders · Amazon Prime eligible

Got questions?

Frequently asked questions

Everything you need to know about Bottle Refreshr.

Product & Materials 4
Is it safe for plastic bottles? +

Yes. Bottle Refreshr is designed for plastic, stainless steel, and glass. Safe for everyday use, including shaker bottles and long-term plastic cleaning when used as directed.

Always rinse thoroughly after cleaning.
Does it work on stainless steel tumblers? +

Yes. Effective on stainless steel tumblers and bottles. Removes odor and loosens residue so bottles rinse or wipe clean. Heavy films may require light wiping.

Can I use it in shaker bottles or straw lids? +

Yes. Works great in shaker bottles and tumblers. For straw lids, cover the straw opening before shaking to prevent leaks.

Cover straw holes with tape for leak-free shaking.
Can I use it on things other than bottles? +

Designed for bottles and tumblers. Some customers use it on coffee pots and blenders — always test a small area first and follow label directions.

Cleaning Performance 4
Does it really clean that well? +

Yes. Designed to break down odor-causing residue and buildup that regular rinsing leaves behind. With proper use, it restores freshness so bottles taste neutral again.

Can it remove old or stubborn buildup? +

Yes. For tougher, set-in residue, an additional cleaning cycle or soak can help. Severely neglected buildup may require light scrubbing.

Does it clean mold or mildew? +

Bottle Refreshr removes stains and organic buildup left by mold and mildew. For safety with visible mold, follow cleaning with proper sanitization (dilute bleach soak or dishwasher sanitize cycle).

Always sanitize after cleaning mold-affected bottles — cleaning and sanitizing are two separate steps.
Does it leave a taste or smell? +

No. When used as directed and rinsed thoroughly, Bottle Refreshr leaves no lasting taste or smell.

How to Use 5
How often should I use it? +

As often as needed. Many customers use it daily or several times a week, depending on what goes in the bottle.

Cold or warm water? +

Warm or hot water gives better results. Heat activates the cleaner and helps break down residue — especially from coffee, protein shakes, or hot drinks.

Do I need the lid on while shaking? +

Yes. Always secure the lid before shaking to ensure proper cleaning and prevent spills.

Can I soak instead of shaking? +

Shaking gives the best results. For tough buildup, soak first — then shake to finish the job.

Is it safe to drink from after cleaning? +

Yes. After rinsing thoroughly with clean water, the bottle is safe to use. The formula is water-soluble and leaves no harmful residue when directions are followed.

Safety, Storage & Brand 4
Any safety precautions? +

Keep out of reach of children. Do not ingest. Avoid contact with eyes. May scratch soft or delicate surfaces. Use as directed.

How should I store it? +

Store in a cool, dry place with the lid tightly closed. Avoid storing next to food or beverages.

How long does one bottle last? +

Approximately 40 cleans per 10 oz bottle — about $0.35 per clean.

Where is Bottle Refreshr made? +

Proudly made in Montana, USA.


Get in touch

Contact us

Have a question, issue, or just want to say hi? We read every message.


We want to hear from you

Help us make Bottle Refreshr better

Your honest feedback shapes the product. Takes about 3 minutes.

About you (optional)
How you used it
Your experience

1 = didn't work · 5 = excellent

1 = very dissatisfied · 5 = very satisfied

Help us improve
Permissions

Your honest feedback helps us make Bottle Refreshr better. Thank you.


Thank you!

Your feedback has been received and means a lot to us. If you left your email, we'll send you a confirmation shortly.

Message sent!

We got your message and will get back to you as soon as possible.